This piece has knots with checks and incursions. There are a few gum pockets that are sticky. Nice color and nice live edge, this has a few rough spots. This has been kiln dried and is ready to use.

This slab does not ship for free. Please inquire for freight cost. There is an 1/8" dent that is about 1/4" long on the wide face. There are a few machine marks on the rustic live edge. There are large knots with checks and cracks throughout this piece. It would make a great bar top, good for interior or exterior use. This slab is kiln dried and ready to use. This Redwood slab would be great for a table, bar top, or countertop!

Claro Walnut (Juglans hindsi) is a unique Walnut species that grows right around the area where Cook Woods is located.  Combining beautiful violet and brownish black streaks with the browns or Eastern walnut (Juglans Nigra). Claro walnut and English walnut have been favored for high end rifles and shotguns by many over the years. They are also used for guitars of various kinds and many other applications including fine furniture, boxes, and high quality turned items. Most of the supply originates in orchards as either production walnut trees (English grafted to the Claro roots) or wind row trees to slow the wind and show property lines (Claro without graft). Claro is a beautiful wood that is in high demand and short supply. Claro Walnut is dense but works and finishes well with the use of a grain sealer. These have all age for more than 5 years and have been surfaced on two sides but may have some planer skip on one face.  Incredible stocks!  Our prices are 30%- 50% less than other high end stock companies! Kiln dried to 10% average moisture content.  This is ideal for a Mannlicher or a bench rest rifle.

Claro Walnut (Juglans hindsi) is a unique Walnut species that grows right around the area where Cook Woods is located.  Combining beautiful violet and brownish black streaks with the browns or Eastern walnut (Juglans Nigra). Claro walnut and English walnut have been favored for high end rifles and shotguns by many over the years. They are also used for guitars of various kinds and many other applications including fine furniture, boxes, and high quality turned items. Most of the supply originates in orchards as either production walnut trees (English grafted to the Claro roots) or wind row trees to slow the wind and show property lines (Claro without graft). Claro is a beautiful wood that is in high demand and short supply. Claro Walnut is dense but works and finishes well with the use of a grain sealer. These have all age for more than 5 years and have been surfaced on two sides but may have some planer skip on one face.  Incredible stocks!  Our prices are 30%- 50% less than other high end stock companies! Two 2-1/2" checks on point at lower butt stock. It falls outside of the pattern.  10% average moisture content.

A distinctive, rare, true Ebony, Black & White Ebony originates from Southeast Asia and Laos. By definition, Ebony has no hue, but rather contains neutral colors like black or white. This special variety has inky black variegations flowing through pale milky white. It is an incredible wood with amazing color contrast. The wood density ranges from .67 to 1.02 depending on the coloration. It is excellent for turning and for use in fancy articles. When turned or finish sanded on boxes it is possible to obtain a high glass-like natural polish. The scientific name of this species is Diospyros embryopteris. Air dried for 2 years. Most pieces still have some residual moisture. Bug holes & small surface checks are present in most. All of this is A Grade, better than average material. Completely wax sealed. W26524: Check out end grain picture! Incredible black streaks! 2" end check. Planer skip on one face. 6" end check that starts where the W# sticker is on picture. This would work for acoustic guitar backs, bass, electric guitar tops, or rifle stocks.

African Sapele is a beautiful, lustrous, iridescence wood with colors that range from light pink to brown and gold to red. It is easy to glue and finish, having similar working properties to Honduras Mahogany. Interlocked grain makes iridescent figure. It is great choice for Acoustic and electric guitars as well as high end jewelry boxes and humidors. Kiln dried and surfaced on two sides. This special material was cut from a $72,000 SUPERB pomelle figured log. It is all kiln dried and surfaced on two sides. This is an absolutely stunning batch of Sapele that you won't want to miss. It is the finest material we have ever had in stock! This has been surface sanded. It has sander skip at the numbered end (34" x 8" at the widest). This corner triangle area has a slight thickness taper eventually at the very corner edge tapering to 1-1/4". The live edge has several 3-12" checks that are generally within 3-4" of the edge of the board. The face has two small patches of checks. This board is 90% free of checks on the faces. The close up pictures show details of the checks. We are happy to answer any questions that you have! This slab would be great for a table, bar top, or countertop!

African Sapele is a beautiful, lustrous, iridescence wood with colors that range from light pink to brown and gold to red. It is easy to glue and finish, having similar working properties to Honduras Mahogany. Interlocked grain makes iridescent figure. It is great choice for Acoustic and electric guitars as well as high end jewelry boxes and humidors. Kiln dried and surfaced on two sides. This special material was cut from a $72,000 SUPERB pomelle figured log. It is all kiln dried and surfaced on two sides. This is an absolutely stunning batch of Sapele that you won't want to miss. It is the finest material we have ever had in stock! Please note that if the boards have a live edge the widths have been measured inside of it. Stunning XF pomelle figure. Live edge. 3/16" bow, 1/8" twist, slight cup. Lays flat with minimal pressure. There are a couple of checks & pin holes in the sapwood only. This slab would be great for a table, bar top, or countertop!

African Sapele is a beautiful, lustrous, iridescence wood with colors that range from light pink to brown and gold to red. It is easy to glue and finish, having similar working properties to Honduras Mahogany. Interlocked grain makes iridescent figure. It is great choice for Acoustic and electric guitars as well as high end jewelry boxes and humidors. Kiln dried and surfaced on two sides. This special material was cut from a $72,000 SUPERB pomelle figured log. It is all kiln dried and surfaced on two sides. This is an absolutely stunning batch of Sapele that you won't want to miss. It is the finest material we have ever had in stock! Nice, large, well-figured slab! This wood slab would be great for table tops, bar tops, high end furniture, musical instruments, and many other uses! Make this board into a one-of-a-kind project. There are a couple small incursions on both faces. 2" surface check on one face. Planer skip on edge. Slight live edge at one end.

 

African Sapele is a beautiful, lustrous, iridescence wood with colors that range from light pink to brown and gold to red. It is easy to glue and finish, having similar working properties to Honduras Mahogany. Interlocked grain makes iridescent figure. It is great choice for Acoustic and electric guitars as well as high end jewelry boxes and humidors. Kiln dried and surfaced on two sides. This special material was cut from a $72,000 SUPERB pomelle figured log. It is all kiln dried and surfaced on two sides. This is an absolutely stunning batch of Sapele that you won't want to miss. It is the finest material we have ever had in stock! Nice figure with good color! A few bark incursions and minor planer skip on both faces. The planer skip causes the thickness to go down a little. The board would get smooth at about 1-5/8" thick. This wood slab would be great for an end table, countertop, or bar top!

This is a whole unit of 4/4 lumber - 100 board feet. The unit contains unsorted, rough lumber (unsurfaced) with some checks. This material is kiln dried. Board sizes: Length: 6 Ft. to 10 Ft. Width: 4-8" Thickness: 3/4" to 7/8"

NOTE: Pallet size listed is an estimate.

This material is surfaced on two sides and may have occasional planer skip. Colors range from red & violet to golden/red. This is high quality African Bubinga! Kiln Dried and ready to use. 100 board feet of material will be shipped on a pallet to you. Board Sizes: Length: 48" to 110" Width: 5" to 10" Thickness: 7/8" +/- 1/8".

NOTE: Pallet size listed is an estimate.

This material is surfaced on two sides and may have occasional planer skip. Colors range from red & violet to golden/red. This is high quality African Bubinga! Kiln Dried and ready to use. 250 board feet of material will be shipped on a pallet to you. Board Sizes: Length: 60" to 112" Width: 5" to 10" Thickness: 7/8" +/- 1/8".

NOTE: Pallet size listed is an estimate.

Enjoy a mixture of quilted & figured lumber in this high quality pack of Oregon Big Leaf Maple! Material is kiln dried and surfaced on two sides but may have occasional planer skip, bite or fuzz. Please note that a small rounded edge or occasional surface check may be present. Figure is a mixture of coverage from 35% to 100% of each board. Average amount of figure coverage is 70% of each board. 250 board feet of material will be shipped on a pallet to you. "Board Sizes: Length: 36" to 96" Width: 3" to 6" Thickness: 7/8" +/- 1/8".

NOTE: Pallet size listed is an estimate.

Enjoy a mixture of quilted & figured lumber in this high quality pack of Oregon Big Leaf Maple! Material is kiln dried and surfaced on two sides but may have occasional planer skip, bite or fuzz. Please note that a small rounded edge or occasional surface check may be present. Figure is a mixture of coverage from 35% to 100% of each board. Average amount of figure coverage is 70% of each board. 100 board feet of material will be shipped on a pallet to you. Board Sizes: Length: 36" to 96" Width: 3" to 6" Thickness: 7/8" +/- 1/8".

NOTE: Pallet size listed is an estimate.

These boards may have some sound pin knots, small surface checks on face. It has wonderful color and unique grain patterns. Kiln dried and surfaced on two sides. Board Sizes: Length: 18" to 46" Width: 3" to 7" Thickness: 7/8" +/- 1/8"

There is minor planer skip on both faces, a bughole center of face below numbers, and several surface checks in figure on both faces. Must be cut in half to qualify for free shipping. Please contact us within 2 hours of ordering if you do not want this cut.

This material has been surfaced on two sides and is ready for your beautiful woodworking projects! Please remember to use a UV inhibitor to retain the best color in your finished items. Board Sizes: Length: 24" to 46" Width: 4" to 6" Thickness: 3/4"-7/8". Slight bow or twist may be present in the longer pieces.

This material has been surfaced on two sides and is ready for your beautiful woodworking projects! Please remember to use a UV inhibitor to retain the best color in your finished items. Board Sizes: Length: 24" to 55" Width: 4" to 6" Thickness: 3/4" to 1". Slight bow or twist may be present in the longer pieces.

NOTE: Pallet size listed is an estimate.

These boards are quartersawn with incredible colors! Board Sizes: Length: 36" to 72" Width: 4" to 10" Thickness: 7/8" +/- 1/8".

NOTE: Pallet size listed is an estimate.

This beautiful species is hard to obtain! 95% of all boards are well quarter sawn! About 5% of boards are rift sawn. Nice dark variegated veins run through rich pinkish red color. Boards are kiln dried and ready to use. Small gum pockets are normal for this species and usually run parallel to the grain. Board Sizes: Length: 24" to 46" Width: 4" to 8" Thickness: 7/8" +/- 1/8"

This beautifully colored and figured Zebrawood is kiln dried and surfaced on two sides. Some boards may have a slight twist or bow. Zebra is prone to gum pockets; expect them on boards that contain small black dots in strings of a few inches. Enjoy the great patterns & contrast of this African beauty! Board Sizes: Length: 36" to 72" Width: 4" to 10" Thickness: 7/8" +/- 1/8".

NOTE: Pallet size listed is an estimate.

A classic for hand carving in America. Carves smoothly without chip out. Holds fine detail well. Lightweight and inexpensive. Boards are surfaced on two sides and edged. Board Sizes: Length: 24" to 46" Width: 4" to 6" Thickness: 3/4"-7/8"

This FAS grade material is kiln dried and surfaced on two sides. It is free of any defects except a minor check or blemish (99% free of defect or better!). Board Sizes: Length: 8 to 10 Ft. Width: 4 to 10" widths Thickness: 7/8".

NOTE: Pallet size listed is an estimate.

This FAS grade material is kiln dried and surfaced on two sides. It is free of any defects except a minor check or blemish (99% free of defect or better!). Board Sizes: Length: 4 to 8 Ft. most 6 to Ft. long. Width: 4 to 9" Thickness: 7/8".

NOTE: Pallet size listed is an estimate.

This FAS grade material is kiln dried and surfaced on two sides. It is free of any defects except a minor check or blemish (99% free of defect or better!). Board Sizes: Length: 9 to 12 Ft. Width: 4 to 10" Thickness: 7/8".

NOTE: Pallet size listed is an estimate.

Beautiful clean boards that are surfaced on two sides with fresh end cuts. Kiln dried and ready to use. Several car companies use this species in veneer form for their car interiors. Board Sizes: Length: 24" to 46" Width: 4" to 6" Thickness: 3/4"-7/8"

Great burl and color. Ideal for a table top. Has lost 1/2 of its original moisture but can be kiln dried for a $75 charge, please contact us within 24 hours within ordering to choose this option. Has several checks/splits that come from the center to the outside bark, see pictures to see the sporadic checks. Can be filled with clear epoxy if needed. Bark incursions with live edge.

3/16" bow and lightly sanded on one face. Great burl and color. Ideal for a table top. Has lost 1/2 of its original moisture but can be kiln dried for a $75 charge, please contact us within 24 hours within ordering to choose this option. Has several checks/splits that come from the center to the outside bark, see pictures to see the sporadic checks. Can be filled with clear epoxy if needed. Bark incursions with live edge.

GREAT AFFORDABLE WOOD! These boards are kiln dried and surface on two sides, generally to 13/16". There is a mixture of fiddleback and quilted Maple lumber with an occasional rough edge, sound knot, or check. They are 95% or better for quality. These boards would be great for cabinets and larger projects. It is a neat figured wood that you can buy at a sizable quantity and not break the bank! Board Sizes: Length: 36" to 46" Width: 3" to 6" (Most are 4"-to-5") Thickness: 13/16"

This slab has a gorgeous live edge, is dried and ready to use. This piece has one square edge and is ready to be used as a mantel in your home!