This Redwood material is kiln dried and ready to use. It has a great workability quality as well as fantastic coloring! Most pieces have a beautiful striping figure present. Overall this all very lightweight material that we know you will enjoy! Pieces that are 5”+ are fresh cut and contain residual moisture!

This Redwood material is kiln dried and ready to use. It has a great workability quality as well as fantastic coloring! Most pieces have a beautiful striping figure present. Overall this all very lightweight material that we know you will enjoy! Pieces that are 5”+ are fresh cut and contain residual moisture!

This piece has great color! Suitable for counter/bar tops, coffee table. Dry and surfaced on two sides.

This slab has incredible color with a sapwood contrast and some fiddleback! There are a couple splits and checks present. It would be great for a side table, shelf, or coffee table. Dry and surfaced on two sides.

This quarter to rift sawn slab has incredible color and sapwood contrast. There is a 12" bark incursion on the back face. Suitable for electric guitars! Dry and surfaced on two sides.

This piece has great color and would be suitable for bar tops, etc. The edges are profiled (rounded). It has a 1/8" cup with some checks and cracks. It has some nice rustic live edges. Kiln dried and surfaced on two sides.

This piece has incredible color and would be suitable for a coffee table. There are numerous checks, incursions, and knots present. It also has some bugholes on the spalted area. Kiln dried and ready to use. Surfaced on two sides. Planed on our custom 70" planer.

This piece has incredible color and some fiddleback. It would be suitable for a coffee table. There are numerous checks, incursions, and knots present. This piece has been skillfully profiled. Kiln dried and ready to use. Surfaced on two sides. Planed on our custom 70" planer.

This piece has incredible color and live edge! It would be suitable for a coffee table. There are numerous checks, incursions, and knots present. This piece has been skillfully profiled. Kiln dried and ready to use. Surfaced on two sides. Planed on our custom 70" planer. Would only need to put legs, sand it and finish it to make a table.

It is kiln dried and ready to use! Width provided for the wide face. There is a machine mark in the live edge. It has checks and incursions. There is some fiddleback.

This genuine Mahogany has beautiful figure and rich, warm color. It is quartersawn, kiln dried, and ready to use. There are end checks up to 2-1/4" deep that run the full length of the board. Because of these, this board is not recommended for acoustic instruments. An ideal use would be a shelf or mantel. Please note that you must be able to work with the rustic nature of the piece. SHIPS TO THE USA ONLY.

This is salvaged material from previous logging that occurred from 1940-1960. Pieces with live edge have a high resin content, making them more dense. Fiddleback is present on some pieces. This is a great species for turning projects. You will enjoy the very aromatic, clean, crisp fragrance if you work this material! There is a large surface check on the numbered face. Some of these pieces may have drying end checks up to 2" wide and up to 1" deep. Must be able to work with abnormalities.

Myrtle is one of the best project woods around! You’ll love the easy workability and finishing of this unique hardwood. You can see from the photos, the dark tiger striped color & figure that set this wood apart. Live edge pieces have bark that will need to be removed for an additional fee if shipping internationally. Kiln dried and surfaced on both sides, this lumber offers great quality for your dollar! This slab has some soft spalting on the corner edges.

Myrtle is one of the best project woods around! You’ll love the easy workability and finishing of this unique hardwood. You can see from the photos, the dark tiger striped color & figure that set this wood apart. Live edge pieces have bark that will need to be removed for an additional fee if shipping internationally. Kiln dried and surfaced on both sides, this lumber offers great quality for your dollar! This slab has a planer mark that will sand off easily on the opposite face of the numbers. There are soft spalting present on the tiger figure.

Myrtle is one of the best project woods around! You’ll love the easy workability and finishing of this unique hardwood. You can see from the photos, the dark tiger striped color & figure that set this wood apart. Live edge pieces have bark that will need to be removed for an additional fee if shipping internationally. Kiln dried and surfaced on both sides, this lumber offers great quality for your dollar!

Myrtle is one of the best project woods around! You’ll love the easy workability and finishing of this unique hardwood. You can see from the photos, the dark tiger striped color & figure that set this wood apart. Live edge pieces have bark that will need to be removed for an additional fee if shipping internationally. Kiln dried and surfaced on both sides, this lumber offers great quality for your dollar! This slab has some soft spalted areas present.

Myrtle is one of the best project woods around! You’ll love the easy workability and finishing of this unique hardwood. You can see from the photos, the dark tiger striped color & figure that set this wood apart. Live edge pieces have bark that will need to be removed for an additional fee if shipping internationally. Kiln dried and surfaced on both sides, this lumber offers great quality for your dollar! This slab has live edges on both sides with planer skips in some areas. It has some voids on the last 5" in the tiger figure with checks present. A 1-2" end check is present on the opposite face of the numbers. A 3/16" cup and a 1/4" twist are present that will lay flat with pressure. There are beautiful burl and fiddleback present too!

Myrtle is one of the best project woods around! You’ll love the easy workability and finishing of this unique hardwood. You can see from the photos, the dark tiger striped color & figure that set this wood apart. Live edge pieces have bark that will need to be removed for an additional fee if shipping internationally. Kiln dried and surfaced on both sides, this lumber offers great quality for your dollar! This slab has some fiddleback with one live edge and a shaped edge. There is a 1/8" bow that lays flat with minimal pressure. Must be able to work with the defect.

Myrtle is one of the best project woods around! You’ll love the easy workability and finishing of this unique hardwood. You can see from the photos, the dark tiger striped color & figure that set this wood apart. Live edge pieces have bark that will need to be removed for an additional fee if shipping internationally. Kiln dried and surfaced on both sides, this lumber offers great quality for your dollar! This quartersawn slab is a bookmatch with W88951 but sold separately. It has a planer skip and a few bark incursions present with a bit or a rustic edge.

Myrtle is one of the best project woods around! You’ll love the easy workability and finishing of this unique hardwood. You can see from the photos, the dark tiger striped color & figure that set this wood apart. Live edge pieces have bark that will need to be removed for an additional fee if shipping internationally. Kiln dried and surfaced on both sides, this lumber offers great quality for your dollar! This slab has some fiddleback and burl with a 1/16" cup. There are a few bark incursions and burl eyes present with some semi rustic live edges.

Myrtle is one of the best project woods around! You’ll love the easy workability and finishing of this unique hardwood. You can see from the photos, the dark tiger striped color & figure that set this wood apart. Live edge pieces have bark that will need to be removed for an additional fee if shipping internationally. Kiln dried and surfaced on both sides, this lumber offers great quality for your dollar! This slab is quarter to rift sawn (numbered face). It has beautiful color with burl, fiddleback, and figure. It has a couple incursions with a rough edge present on the opposite end of numbers. A 1/16" twist is present as well.

Myrtle is one of the best project woods around! You’ll love the easy workability and finishing of this unique hardwood. You can see from the photos, the dark tiger striped color & figure that set this wood apart. Live edge pieces have bark that will need to be removed for an additional fee if shipping internationally. Kiln dried and surfaced on both sides, this lumber offers great quality for your dollar! This slab is quartersawn with one live edge with a few small incursions and bug holes present. There is beautiful burl, fiddleback and tiger stripes present. It is suitable for guitars but have to be able to work with the defects.

This slab has great color and patterns with a live edge. A few pin knots and checks are present. Suitable for tables, etc. Kiln dried and ready to use!

This slab has incredible color with some fiddleback present! There are a few scattered minor surface checks present. Dry and surfaced on two sides.

This slab has incredible color with a slight machine mark present! It would be great for a side table, or instruments. Dry and surfaced on two sides.

This quarter to rift sawn slab has incredible color and sapwood contrast! It has some bacon figure below the numbers. It has 2 checks present in the live edge with some really beautiful ribbon figure. Suitable for electric guitars! Dry and surfaced on two sides.

This piece has great color with unique patterns! There are several pinholes, rough natural edges, and contoured ends. Kiln dried and ready to use! USA only!

This piece has a 2 1/4" incursion. It is ideal for guitars and side/end table. Kiln dried and ready to use!

This piece has numerous burl eyes with incursions. Great for an electric guitar arch top of 2 drop tops. Kiln dried and ready to use!

This piece has numerous small sound pin knots and incursions present. Kiln dried and ready to use!