Filter

Filter Results

52 items

Laguna Tools | P|Flux: 2 Cyclone Dust Collector
MDCPF22201
-
$2,199.00
X
MDCPF22201

Laguna Tools | P|Flux: 2 Cyclone Dust Collector

Laguna Tools | P|Flux: 2 Cyclone Dust Collector

Peerless performance. Sporting standard black HEPA filtration the P|Flux series is filled with innovative details such as:
• LED shows when drum is full
• LED shows when filter needs cleaning
• Swing-away doors sports acoustic foam on the inside to lower noise level.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

 

SPECS:

Motor HP: 2 HP
Phase: 1
Voltage: 220V
Amps: 14 Amps
Hertz: 60
Plug: No
RPM: 3450
Control Panel: Embedded Anodized Aluminum w. Magnetic On/Off
LED Drum: : Probe activates LED when drum is full
LED Canister:: Sensor detects rise in static pressure inside HEPA Filter & activates LED
Hand Held Remote Control: High Frequency
Shop Setting CFM*: 1166
Inlet CFM: 1740
Max Static Pressure (inches of water): 9.3″
Impeller/Fan Size: 14.5″
Impeller Material: Steel
Impeller Type: Radial Fin
Balanced: ISO 1940
Inlet Diameters: 8″ main to  4″ x 2 ports
Drum Capacity: 46 Gal.
Octagon Drum: Low Pressure Suction
Drum Collection Bag (Dia. x L): Plastic Bag (Ø610 x 950mmL)
Canister Filter Type: HEPA
Filtration Efficiency: 0.4micron @ 99.2%
MERV Rating: 16+/Refer to tab 4
Canister Diameter: Ø400mm (15.75″)
Canister Length: 900mm (35.43″)
Filter Surface Area: 9.5m²/109ft²
Canister Cleaning: Clean using external air compressor (not incl)
Canister Flter Lower Dust Collection: Metal end cap with 4″ hookup
Wheels: (4x) 4″ PU Caster
US/CSA Approved: Yes
Decibel Reading: 76 d B(A) (@9.8ft)
Machine Weight: 154kgs/340Lbs
Shipping Weight: 185kgs/408Lbs
Assembled Dimensions: (L x W x H)1178 x 690 x 2025 mm

 

When lifting the drum into position a connector on the back of drum automatically hooks up to a pipe in cyclone this way creating a low pressure in bottom of the drum, this is designed to hold down plastic bag to avoid it being sucked up into the cone during use, no other cyclone or dust system has such a smart system, it is a vast improvement over last generation.

If you chose to use the p|flux without a bag you can simple shut off the system using a valve offering you speed and flexibility.

 

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$2,199.00

Full Item Details
Laguna Tools | P|Flux: 1 Cyclone Dust Collector
MDCPF15110
-
$1,699.00
X
MDCPF15110

Laguna Tools | P|Flux: 1 Cyclone Dust Collector

Laguna Tools | C|Flux: 3 Cyclone Dust Collector

Peerless performance. Sporting standard black HEPA filtration the P|Flux series is filled with innovative details such as:
• LED shows when drum is full
• LED shows when filter needs cleaning
• Swing-away doors sports acoustic foam on the inside to lower noise level.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

 

SPECS:

Motor HP: 1.5 HP
Phase: 1
Voltage: 110v
220v Option available – sold separately
Amps: 18.8 Amps
Hertz: 60
Plug: No
RPM: 3450
Control Panel: Embedded Anodized Aluminum w. Magnetic On/Off
Hand held remote control: High Frequency
Shop Setting CFM*: 900
Inlet CFM: 1314
Max Static Pressure (inches of water): 10.1″
Impeller/Fan Size: 13.5″
Impeller Material: Steel
Impeller Type: Radial Fin
Balanced To:: ISO 1940
Inlet Diameters: 6” manifold 4” x 2
Drum Capacity: 32 Gal.
Octagon Drum: Low Pressure Suction
Drum Collection Bag (Dia. x L): Plastic bag (24” x 37 3/8”)
Canister Filter Type: HEPA
Filtration Efficiency: 0.4micron @ 99.2%
MERV Rating: 16+/Refer to tab 4
Canister Diameter: Ø400mm (15.75″)
Canister Length: 500mm (19.69″)
Filter Surface Area: 4.5m²/48ft²
Canister Cleaning: Clean using external air compressor (not incl)
Canister Filter Lower Dust Collection: Metal end cap with 4″ hookup window & quick release
Frame Wheels: (4x) 4″ PU Caster
Drum Wheels: (4x) 4″ PU Caster
US/CSA Approved: Yes
Decibel Reading: 70 d B(A) (@9.8ft)
Machine weight: 122kgs/269Lbs
Shipping weight: 150kgs/331Lbs
Assembled Dimensions (L x W x H): 45 1/2″ x 24 1/4 x 68 1/2″ : 1078x614x1722mm

When lifting the drum into position a connector on the back of drum automatically hooks up to a pipe in cyclone this way creating a low pressure in bottom of the drum, this is designed to hold down plastic bag to avoid it being sucked up into the cone during use, no other cyclone or dust system has such a smart system, it is a vast improvement over last generation.

If you chose to use the p|flux without a bag you can simple shut off the system using a valve offering you speed and flexibility.

 

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$1,699.00

Full Item Details
18|BX 3HP 16" RESAW (220V)
MBAND18BX2203
-
$1,999.00
X
MBAND18BX2203

18|BX 3HP 16" RESAW (220V)

Laguna Tools | 18|BX 3HP 16" RESAW 220V

The 18|BX Bandsaw follows in the traditions of high-performance and reliability established by the widely-used Laguna Tools 14|12 and 14|bx models. The 18|bx is built around a 3HP, 220V motor and 145” (368 cm) blade for consistent results, cut-after-cut, regardless of material.

*$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

*Part Number: MBAND18BX2203
*Motor: 3HP, 220V, 1 Ph. 12 Amp.
*Recommended Breaker: 20 Amp.
*Magnetic Starter: √
*Min-Max Blade Width: 1⁄8″-1 1⁄4″
*Resaw Capacity: 16″
*Throat: 18 “
*Blade Length: 145″
*Disc-Brake with Micro Switch: √
*220V Outlet on Back for Light: √
*Window for Tension: √
*Window for Tracking: √
*Magnetic Blade Tension Guide: √
*Worm Gear & Pinion Upper Guide: √
*10 Point Laguna Ceramic Guides: √
*Flat Poly-Groove Drive Belt: √
*Premium Anodized Insert with Micro Adjustment: √
*Dynamically Balanced Cast Iron Wheels: √
*Urethane Single Piece Snap-on Tire: √
*Cast Table Size: 20″ x 26″
*Table Tilt: -6°, +45°
*Quick-Release Tension: √
*Hi/Low Anodized Aluminum Fence: 22 1⁄2″ x 5 3⁄4″ x 1⁄2″
*Table Height: 38″
*Dust Ports: 2 x 4″
*Overall Height: 77 3⁄4″
*Dimensions, Base: 27″ x 20″
*Dimensions Overall: 36″ x 30″
*Dimensions Box: 82″ x 34″ x 24″
.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$1,999.00

Full Item Details
Laguna Tools | Revo 18|36 Lathe 1.5HP (110V)
MLAREVO1836110150
-
$2,399.00
X
MLAREVO1836110150

Laguna Tools | Revo 18|36 Lathe 1.5HP (110V)

Laguna Tools | Revo 18|36 Lathe 1.5HP (110V)

The 18|36 Lathe features a brand new design & details that will excite any serious bowl turner! The First feature that will catch your attention is undoubtedly the ergonomic angled control panel made from anodized aluminum. The blue hue of the DRO along with the beautiful knurled control knob fitted with a rubber grip signals this is no ordinary lathe.The bed is made from steel which allows the cast iron headstock to travel incredibly smoothly. Steel is the preferred material due to its well known longevity & strength.Electronic variable speed is obtained via a VFD that converts 1 phase input to 3 phase output, so even at low settings you will get an incredible amount of torque. The DRO gives you an accurate RPM readout at all times any fine adjustments are made electronically. Changing from high to low settings is made easy by using the quick release handle.The headstock & tailstock lock handles are situated on the back to eliminate any interruptions to your work flow. Ergonomically designed handles use a cam lock resulting in a firm feel with no deflection.

Click here to watch the "revolution" in action!

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

THE REVOLUTION IS HERE:

*Electrical: 1.5HP, 110 Volt, 60 hz
*Motor: Induction, 1725 RPM, TEFC
*VFD: Delta S1 Variable Frequency Drive
*Phase: 1 Phase input, 3 Phase output
*Poly-Groove Drive Belt w EZ Access
*Recommended Breaker: 20 Amp
*Spring Loaded Spindle Lock
*Max. Outboard Swing: 32”
*Swing over Banjo: 13 ½”
*Steel Bed: ASTM A36
*Spindle Taper: MT#2
*Swing over Bed: 18”
*RPM High:135-3500
*RPM Low: 50-1300
*Tailstock Quill: 4 ½”, Engraved, Self-Ejecting
*Floor to Spindle Center: 41 ½” w Pads
*Front Bearing: TPI Taiwan 6207LLU
*Rear Bearing: TPI Taiwan 6205LLU
*Spindle Index #: 14/36/48 w Lock
*Distance between Centers: 36”
*Headstock Through-Bore: 3/8”
*Headstock Travel: Full Length
*Tailstock Through-Bore: 3/8”
*Tailstock Storage of centers
*Spindle Size: 1 ¼” X8 TPI RH
*Floor to Bed: 32 ½” w Pads
*Floor Space: W 60” D 26” H 47”
*Weight (Net/Ship): 427/480 Lbs.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$2,399.00

Full Item Details
Laguna Tools | 20" Pro Planer ShearTec II (7.5HP)
MPLAN2011-0130
-
$6,499.00
X
MPLAN2011-0130

Laguna Tools | 20" Pro Planer ShearTec II (7.5HP)

Laguna Tools | 20" Pro Planer ShearTec II

The new 20” planer fills the gap between the popular 4 post 16” and 20” planers and the really heavy duty planers. The advantage to this planer over the 4 post planers is the way the bed is secured to the frame with a Gib System. With 5-1/2” of cast Gib travels on the outer machine frame giving the bed more stability than a traditional 4 post machine. It allows the bed to become one with the frame when in its locked position, rather than just relying on the 4 post to keep the bed steady during operation.Features on the Pro Planer include: Bed Rollers with micro adjustment to lower friction when planing woods with high moisture content or resin woods, 2 Feed Speeds, Digital Readout with a tape as backup and a ShearTec II Cutterhead.The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing. Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

THE UNEXPECTED:

*Motor: 7.5 HP 1 phase 220 volt TEFC
*Readout: Digital with Tape Backup
*Table: 56” D X 20” W Incl. 2 X Cast Iron Extensions
*ShearTecII 4-sided German Solid Carbide Cutterhead
*Inserts: 6 Rows X 23 Knives = 138
*2 Feed Speeds: 16 + 20 Ft/Min
*Mechanical Adjustment of Bed
*Mechanical Adjustment of Bed Rollers
*2 Polished Steel Rollers for Material Return
*5” Dust-Hood
*In/Out-Feed Cast Extensions Included
*Capacity Min-Max: 3/16” – 8”
*Max Removal: 1/8”, 3mm
*Weight: (Net/Ship) 880/990 Lbs.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$6,499.00

Full Item Details
Dust Collector kit for 1HP
1HPDCKIT
-
$45.00
X
1HPDCKIT

Dust Collector kit for 1HP

Includes:

2 - pieces 4" hose 10' long
1 - piece of 4" universal dust hood
10 - pieces of 4" hose clamps
1 - tablesawdust hood
2 - 4" blast gates
1 - Y 4" to 4" fitting
5 - clear plastic bags (NOTE: These bags do not fit 60 gallon drums)

* Does not qualify for free shipping (ships direct from manufacturer)
* Website discounts/coupons/codes do not apply to this item.

SHIPPING/BILLING:
Your order will ship directly from the manufacturer in approximately 5-7 business days.
Express or overnight shipping is not available for this product.
Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries)
Please Contact Cook Woods directly after purchase to discuss shipping arrangements!

WARRANTY/RETURNS:
Laguna handles all warranty/return issues directly.
Click for Warranty Information
Click for Return Information

 

View Full Description

$45.00

Full Item Details
Fusion Standard Throat Plate
PTSAW17536110-0130-6
-
$59.99
X
PTSAW17536110-0130-6

Fusion Standard Throat Plate

*Free Shipping does not apply to this item

SHIPPING/BILLING:
Your order will ship directly from the manufacturer in approximately 5-7 business days.
Express or overnight shipping is not available for this product.
Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries)
Please Contact Cook Woods directly after purchase to discuss shipping arrangements!

WARRANTY/RETURNS:
Laguna handles all warranty/return issues directly.
Click for Warranty Information
Click for Return Information

 

View Full Description

$59.99

Full Item Details
Laguna Tools | IQ Tooling Kit
TOOLING KIT - IQ
-
$299.00
X
TOOLING KIT - IQ

Laguna Tools | IQ Tooling Kit

Includes:

1- 1/4″ Spiral Plunge Up-Cut

1- 1/2″ V Groove 90 Degree Angle

1- 1/4″ Spiral Plunge Down-Cut

1- 1/4″ Spiral Ball Nose Up-Cut

1- 1/4” Spiral Plunge Up-Cut

1- 1/8″ ER20 Collet

1- 1/4″ ER20 Collet

1- 1/2″ ER20 Collet

 

*$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
* Website discounts/coupons/codes do not apply to this item.

SHIPPING/BILLING:
Your order will ship directly from the manufacturer in approximately 5-7 business days.
Express or overnight shipping is not available for this product.
Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries)
Please Contact Cook Woods directly after purchase to discuss shipping arrangements!

WARRANTY/RETURNS:
Laguna handles all warranty/return issues directly.
Click for Warranty Information
Click for Return Information

 

View Full Description

$299.00

Full Item Details
Laguna Tools | IQ Rolling Stand
IQ ROLLING STAND
-
$899.00
X
IQ ROLLING STAND

Laguna Tools | IQ Rolling Stand

 

The ultimate station for your tabletop IQ CNC machine. The roller table allows mobility with a sturdy build and magnetic doors for ease of use.

Includes:

Q Aluminum Frame Rolling Stand
2-Doors with Magnetic Latches
Heavy-Duty Rolling Locking Casters
Dimensions: 32″ W x 53″ L x 31″ H

Dimensions of Rolling Stand is 32″ W x 53″ L x 31″ H

*$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
* Website discounts/coupons/codes do not apply to this item.

SHIPPING/BILLING:
Your order will ship directly from the manufacturer in approximately 5-7 business days.
Express or overnight shipping is not available for this product.
Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries)
Please Contact Cook Woods directly after purchase to discuss shipping arrangements!

WARRANTY/RETURNS:
Laguna handles all warranty/return issues directly.
Click for Warranty Information
Click for Return Information

 

View Full Description

$899.00

Full Item Details
Laguna Tools | 3? Riser Kit
ALAREVO18 3" RISER BLOCKS
-
$299.00
X
ALAREVO18 3" RISER BLOCKS

Laguna Tools | 3? Riser Kit

Raises the Lathe 3″ for taller wood-turners.  The Riser Kit can even be used in conjunction with Wheel System.

*$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
* Website discounts/coupons/codes do not apply to this item.

SHIPPING/BILLING:
Your order will ship directly from the manufacturer in approximately 5-7 business days.
Express or overnight shipping is not available for this product.
Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries)
Please Contact Cook Woods directly after purchase to discuss shipping arrangements!

WARRANTY/RETURNS:
Laguna handles all warranty/return issues directly.
Click for Warranty Information
Click for Return Information

 

View Full Description

$299.00

Full Item Details
Laguna Tools | Comparator
ALAREVO18 COMPARATOR
-
$50.00
X
ALAREVO18 COMPARATOR

Laguna Tools | Comparator

Centers used to mount an original or template for visual copying.

*$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
* Website discounts/coupons/codes do not apply to this item.

SHIPPING/BILLING:
Your order will ship directly from the manufacturer in approximately 5-7 business days.
Express or overnight shipping is not available for this product.
Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries)
Please Contact Cook Woods directly after purchase to discuss shipping arrangements!

WARRANTY/RETURNS:
Laguna handles all warranty/return issues directly.
Click for Warranty Information
Click for Return Information

 

View Full Description

$50.00

Full Item Details
Laguna Tools | Deluxe Wheel System
ALAREVO18 WHEEL SYSTEM
-
$499.00
X
ALAREVO18 WHEEL SYSTEM

Laguna Tools | Deluxe Wheel System

The Wheel System is designed for maximum stability by allowing the Revo 18|36 to only sit on the four pads when in use. When moving the Revo 18|36, all four swiveling casters are engaged.  Dual Gas Struts make raising & lowering ultra smooth.

 

*$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
* Website discounts/coupons/codes do not apply to this item.

SHIPPING/BILLING:
Your order will ship directly from the manufacturer in approximately 5-7 business days.
Express or overnight shipping is not available for this product.
Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries)
Please Contact Cook Woods directly after purchase to discuss shipping arrangements!

WARRANTY/RETURNS:
Laguna handles all warranty/return issues directly.
Click for Warranty Information
Click for Return Information

 

View Full Description

$499.00

Full Item Details
Laguna Tools | Cast Iron Leg
ALAREVO18 CAST LEG
-
$399.00
X
ALAREVO18 CAST LEG

Laguna Tools | Cast Iron Leg

Cast Iron Support Leg is supplied with foot-pads.  Works in conjunction with Steel Bed

 

*$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
* Website discounts/coupons/codes do not apply to this item.

SHIPPING/BILLING:
Your order will ship directly from the manufacturer in approximately 5-7 business days.
Express or overnight shipping is not available for this product.
Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries)
Please Contact Cook Woods directly after purchase to discuss shipping arrangements!

WARRANTY/RETURNS:
Laguna handles all warranty/return issues directly.
Click for Warranty Information
Click for Return Information

 

View Full Description

$399.00

Full Item Details
Laguna Tools | Shear-Tec II Replacement Knife (10 Pk)
X
ATSHEARTECII

Laguna Tools | Shear-Tec II Replacement Knife (10 Pk)

Jointer/Planer Knife For ShearTec II Cutterhead

Includes:

10 pack of ShearTec II Knives

 Weight 0.25 lbs

*$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
* Website discounts/coupons/codes do not apply to this item.

SHIPPING/BILLING:
Your order will ship directly from the manufacturer in approximately 5-7 business days.
Express or overnight shipping is not available for this product.
Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries)
Please Contact Cook Woods directly after purchase to discuss shipping arrangements!

WARRANTY/RETURNS:
Laguna handles all warranty/return issues directly.
Click for Warranty Information
Click for Return Information

 

View Full Description

$60.00

Full Item Details
Laguna Tools | 20? Steel Extension
ALAREVO18 20" EXTENSION
-
$499.00
X
ALAREVO18 20" EXTENSION

Laguna Tools | 20? Steel Extension

The 20″ Extension includes a solid cast iron tailstock support block for outboard turning.  The support block raises the tailstock back to centerline for stability & additional material support when outboard turning.  It is supplied with a Tool-Rest Extender. The 20″ Extension can be mounted in 4 different positions including headstock or tailstock end of the bed as a bed extension, low on the leg for outboard turning, or perpendicular to the headstock for superior tool rest positioning.

*$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
* Website discounts/coupons/codes do not apply to this item.

SHIPPING/BILLING:
Your order will ship directly from the manufacturer in approximately 5-7 business days.
Express or overnight shipping is not available for this product.
Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries)
Please Contact Cook Woods directly after purchase to discuss shipping arrangements!

WARRANTY/RETURNS:
Laguna handles all warranty/return issues directly.
Click for Warranty Information
Click for Return Information

 

View Full Description

$499.00

Full Item Details
Laguna Tools | Industrial 25? Planer With 15HP 3PH
MPLAN25-15-3-0130
-
$11,999.00
X
MPLAN25-15-3-0130

Laguna Tools | Industrial 25? Planer With 15HP 3PH

Laguna Tools | Industrial 25" Planer With 15HP (3PH)

The Industrial 25” Planer brings a whole new standard for Heavy Duty thickness planers.  The 15HP 3 Phase motor makes sure you never run out of power even when planing full 25” boards.

Oversized bearing housings ensure ultra-smooth, quiet performance and long life. Most thickness- planers in this class have only 2 or 4 speeds and it seems they never have the right speed for the job. The Laguna 25” comes standard with Electronic Variable Speed meaning you will ALWAYS have the exact speed required.

Another feature not normally found in this class is the standard PLC control which allows you to simply enter in the desired height and the bed moves automatically to that setting. You’ll never want to go back to turning a hand wheel to find your thickness (or even holding down a button for that matter!). The PLC in the Laguna Industrial 25” planer also has automatic backlash compensation ensuring exact thicknesses.

Of course no world class planer would be complete without our incredible ShearTec II cutter head, which boasts 6 rows of 4 sided German carbide inserts for a total of 174 knives!

 

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

THE UNEXPECTED:

Motor, Cutterhead: 15HP 3 Phase, 220 Volt
Motor, Feed: ¾ HP, DC Electronically Variable speed
Motor, Vertical: ¾ HP, AC
DRO (Digital Read Out)
PLC Programmable Height Setting
Push-Button Height Setting
Manual Back-Up Height Setting
Maximum Stock Width: 25”
Maximum Stock Thickness: 9”
Minimum Stock Thickness: 1/8”
Minimum Stock Length: 10”
Maximum Stock Removal 01-12” Wide: 6 mm/1/4”
Maximum Stock Removal 12-25” Wide: 3 mm/1/8”
Electronic Variable Speed 10-30 FPM.
Table Size: 52”L x 26”W (including extensions)
ShearTecII Cutterhead: 6 row 174 Insert Knives
Cutter-head Diameter: 3-1/2”
Cutter-head Speed: 4800 RPM
Knives: 174 ShearTec II, 4-sided, Solid Carbide
Segmented In-feed Roller: 3”
Segmented Pressure Bar
2 Polished Out-feed Rollers: 3”
Retractable Table Rollers: Adjustable
In/Out-Feed Cast Extensions Included 10″ L X 26″ W
Dustport: 5”
CSA Components
Weight 1500 Lbs.

 

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$11,999.00

Full Item Details
Laguna Tools | Industrial 25? Planer With 10HP (1PH)
MPLAN25-10-1-0130
-
$11,999.00
X
MPLAN25-10-1-0130

Laguna Tools | Industrial 25? Planer With 10HP (1PH)

Laguna Tools | Industrial 25" Planer With 10HP (1PH)

The Industrial 25” Planer brings a whole new standard for Heavy Duty thickness planers.  The 10HP 1 Phase motor makes sure you never run out of power even when planing full 25” boards.

Oversized bearing housings ensure ultra-smooth, quiet performance and long life. Most thickness- planers in this class have only 2 or 4 speeds and it seems they never have the right speed for the job. The Laguna 25” comes standard with Electronic Variable Speed meaning you will ALWAYS have the exact speed required.

Another feature not normally found in this class is the standard PLC control which allows you to simply enter in the desired height and the bed moves automatically to that setting. You’ll never want to go back to turning a hand wheel to find your thickness (or even holding down a button for that matter!). The PLC in the Laguna Industrial 25” planer also has automatic backlash compensation ensuring exact thicknesses.

Of course no world class planer would be complete without our incredible ShearTec II cutter head, which boasts 6 rows of 4 sided German carbide inserts for a total of 174 knives!

 

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

THE UNEXPECTED:

Motor, Cutterhead: 10HP 1 Phase, 220 Volt
Motor, Feed: ¾ HP, DC Electronically Variable speed
Motor, Vertical: ¾ HP, AC
DRO (Digital Read Out)
PLC Programmable Height Setting
Push-Button Height Setting
Manual Back-Up Height Setting
Maximum Stock Width: 25”
Maximum Stock Thickness: 9”
Minimum Stock Thickness: 1/8”
Minimum Stock Length: 10”
Maximum Stock Removal 01-12” Wide: 6 mm/1/4”
Maximum Stock Removal 12-25” Wide: 3 mm/1/8”
Electronic Variable Speed 10-30 FPM.
Table Size: 52”L x 26”W (including extensions)
ShearTecII Cutterhead: 6 row – 174 Insert Knives
Cutter-head Diameter: 3-1/2”
Cutter-head Speed: 4800 RPM
Knives: 174 ShearTec II, 4-sided, Solid Carbide
Segmented In-feed Roller: 3”
Segmented Pressure Bar
2 Polished Out-feed Rollers: 3”
Retractable Table Rollers: Adjustable
In/Out-Feed Cast Extensions Included 10″ L X 26″ W
Dustport: 5”
CSA Components
Weight 1945 Lbs.

 

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$11,999.00

Full Item Details
Laguna Tools | T|Flux: 5 Cyclone Dust Collector
MDCTF52201
-
$3,999.00
X
MDCTF52201

Laguna Tools | T|Flux: 5 Cyclone Dust Collector

Laguna Tools | T|Flux: 5 Cyclone Dust Collector

The T|Flux series from Laguna starts to get serious. The Titan cyclones are geared towards clients who desire a single central unit for the entire shop.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

The T|Flux cyclones are equipped with a 10″ port that splits into 3 x 4″, allowing you to run a large diameter pipe system throughout your shop with drops to the individual stations.
All models are outfitted with smart drums which alert the user when the drums reach capacity.

Automatic canister cleaning is controlled by a timer that turns on every work hour & runs 10 seconds clockwise & counter clockwise.
The 1 micron canister has a huge surface area and filtrates 99.97% of particles ranging from 0.2 to 2 microns.

Smart Drums comes standard with high quality casters and feature our unique quick disconnect design.

 

SPECS:

Motor HP: 5 HP
Phase: 1
Voltage: 220v
Amps: 22.4 Amps
Hertz: 60
Plug: No
RPM: 3450
Switch type: Sunken Radio Frequency Remote switch with LED full drum & LED Filter dirt detection
Hand held remote control: High Frequency
Shop Setting CFM*: 2450
Inlet CFM: 4295
Max Static Pressure (inches of water): 12.1″
Impeller/Fan Size: 16″
Impeller Material: Steel
Impeller type: Radial Fin
Balanced To:: ISO 1940
Inlet Diameters: 10″
Drum Capacity: 54 Gal.
Octagon drum: Low Pressure Suction
Drum collection bag (Dia. x L): Plastic bag (740 x 1300mmL)
Canister Filter type: Black 1 Micron
Filtration efficiency: 0.2-2micron @ 99.97%
MERV rating: 12
Canister diameter: 600mm (23.62″)
Canister length: 1200mm (47.24″)
Filter Surface Area: 15m²/162ft²
Canister cleaning: Auto Clean (gear motor)/Cleans every hour 10 sec clockwise, 10 sec counter-clockwise
Canister filter lower dust collection: Plastic bag (610 x 600mmL)
Wheels: None
US/CSA Approved: Yes
Decibel Reading: 76 d B(A) (@9.8ft)
Machine weight: 325kgs/717Lbs
Shipping weight: 430kgs/948Lbs
Assembled Dimensions (L x W x H): 73″ x 39″ x111 ” | 1845x989x2810mm

 

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$3,999.00

Full Item Details
Laguna Tools | P|Flux: 3 Cyclone Dust Collector
MDCPF32201
-
$2,499.00
X
MDCPF32201

Laguna Tools | P|Flux: 3 Cyclone Dust Collector

Laguna Tools | P|Flux: 3 Cyclone Dust Collector

Peerless performance. Sporting standard black HEPA filtration the P|Flux series is filled with innovative details such as:
• LED shows when drum is full
• LED shows when filter needs cleaning
• Swing-away doors sports acoustic foam on the inside to lower noise level.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

 

SPECS:

Motor HP: 3 HP
Phase: 1
Voltage: 220V
Amps: 22 Amps
Hertz: 60
Plug: No
RPM: 3450
Switch type: Sunken Radio Frequency Remote switch with LED Full drum detection & LED HEPA dirty detection
Hand held remote control: High Frequency
Shop Setting CFM*: 1624
Inlet CFM: 2817
Max Static Pressure (inches of water): 11.2″
Impeller/Fan Size: 15.5″
Impeller Material: Steel
Impeller Type: Radial Fin
Balanced: ISO 1940
Inlet Diameters: 8″ by 4″ x 3 Ports
Drum Capacity: 46 Gal.
Octagon Drum: Low Pressure Suction
Drum collection bag (Dia. x L): Plastic bag (Ø610 x 950mmL)
Canister Filter type: HEPA
Filtration Efficiency: 0.4micron @ 99.2%
MERV Rating: 16+/Refer to tab 4
Canister Diameter: Ø400mm (15.75″)
Canister length: 900mm (35.43″)
Filter Surface Area: 9.5m²/109ft²
Canister filter lower dust collection: Metal end cap with 4″ hookup
Base with perforated sheet across canister floor: Included
Wheels: 4″ Flat Caster
US/CSA Approved: Yes
Decibel Reading: 76 d B(A) (@9.8ft)
Machine weight: 159kgs/351Lbs
Shipping weight: 190kgs/419Lbs
Assembled Dimensions (L x W x H): 1178x690x2025mm

When lifting the drum into position a connector on the back of drum automatically hooks up to a pipe in cyclone this way creating a low pressure in bottom of the drum, this is designed to hold down plastic bag to avoid it being sucked up into the cone during use, no other cyclone or dust system has such a smart system, it is a vast improvement over last generation.

If you chose to use the p|flux without a bag you can simple shut off the system using a valve offering you speed and flexibility.

 

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$2,499.00

Full Item Details
Laguna Tools | C|Flux: 3 Cyclone Dust Collector
MDCCF32201
-
$1,799.00
X
MDCCF32201

Laguna Tools | C|Flux: 3 Cyclone Dust Collector

Laguna Tools | C|Flux: 3 Cyclone Dust Collector

The c|flux series sets a new standard for cyclones. The horizontal chute is designed to maximize airflow while improving CFM.
All shapes and dimensions has been reevaluated to optimize performance.

The c|flux:3 comes standard with a 1 micron canister providing filtration of 99.97% of particles between the sizes of 0.2 to 2 micron & features 109 sq/ft. of polyester spun bond pleated filter to ensure maximum airflow. 270° manual clean comes standard.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

SPECS:

Motor HP: 3 HP
Phase: 1
Voltage: 220v
Amps: 22 Amps
Hertz: 60
Plug: No
RPM: 3450
Switch type: Radio Frequency Remote switch – Black Box
Hand held remote control: High Frequency
Shop Setting CFM*: 1624
Inlet CFM: 2817
Max Static Pressure (inches of water): 11.2″
Impeller/Fan Size: 15.5″
Impeller Material: Steel
Impeller type: Radial Fin
Balanced To:: ISO 1940
Inlet Diameters: 8″ by 4″ x 3 ports
Drum Capacity: 46 Gal.
Octagon drum: Metal Drum Insert
Drum collection bag (Dia. x L): Plastic bag (610 x 950mmL)
Canister Filter type: 1 Micron
Filtration efficiency: 0.2-2 micron @ 99.97%
MERV rating: 12
Canister diameter: 400mm (15.75″)
Canister length: 900mm (19.69″)
Filter Surface Area: 9.5m²/109ft²
Canister cleaning: Manual Handle Crank/*Optional Auto Cleaning Kit available
Canister filter lower dust collection: Plastic bag (400 x 600mmL)
Base with perforated sheet across canister floor: N/A
Wheels: 4″ Flat Caster
US/CSA Approved: Yes
Decibel Reading: 88 d B(A) (@9.8ft)
Machine weight: 140kgs/309Lbs
Shipping weight: 170kgs/375Lbs
Assembled Dimensions (L x W x H): 46″ x 27″ x 79″ | 1178x690x2025mm

 

The c|flux series can be equipped with an optional auto clean kit either at time of purchase or as an add-on later. The auto clean kit includes a smart sensor that detects a rise in static pressure indicating the filter is getting clogged and automatically activates the cleaning procedure.

Ingenious lift system quickly moves the drum off the floor and seals against the drum lid, avoiding the need for a flex hose. This design allows for much better portability as you are not forcing 4 wheels into the floor while pushing the unit.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$1,799.00

Full Item Details
Laguna Tools | C|Flux: 2 Cyclone Dust Collector
MDCCF22201
-
$1,599.00
X
MDCCF22201

Laguna Tools | C|Flux: 2 Cyclone Dust Collector

Laguna Tools | C|Flux: 2 Cyclone Dust Collector

The c|flux series sets a new standard for cyclones. The horizontal chute is designed to maximize airflow while improving CFM.
All shapes and dimensions has been reevaluated to optimize performance.

The c|flux:2 comes standard with a 1 micron canister providing filtration of 99.97% of particles between the sizes of 0.2 to 2 micron & features 109 sq/ft. of polyester spun bond pleated filter to ensure maximum airflow. 270° manual clean comes standard.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

SPECS:

Motor HP: 2 HP
Phase: 1
Voltage: 220v
Amps: 14 Amps
Hertz: 60
Plug: No
RPM: 3450
Switch type: Radio Frequency Remote switch – Black Box
Hand held remote control: HF
Shop Setting CFM*: 1166
Inlet CFM: 1740
Max Static Pressure (inches of water): 9.3″
Impeller/Fan Size: 14.5″
Impeller Material: Steel
Impeller type: Radial Fin
Balanced To:: ISO 1940
Inlet Diameters: 8″ main to  4″ x 2 ports
Drum Capacity: 46 Gal.
Octagon drum: Metal drum insert
Drum collection bag (Dia. x L): Plastic bag (610 x 950mmL)
Canister Filter type: 1 Micron
Filtration efficiency: 0.2-2micron @ 99.97%
MERV rating: 12
Canister diameter: 400mm (15.75″)
Cansiter length: 900mm (19.69″)
Filter Surface Area: 9.5m²/109ft²
Canister cleaning: Manual Handle Crank/*Optional Auto Cleaning Kit available
Canister filter lower dust collection: Plastic bag (400 x 600mmL)
Base with perforated sheet across canister floor: N/A
Wheels: 4″ Flat Caster
US/CSA Approved: Yes
Decibel Reading: 88 d B(A) (@9.8ft)
Machine weight: 134kgs/296Lbs
Shipping weight: 165kgs/364Lbs
Assembled Dimensions (L x W x H): 46″ x 27″ x 79″ | 1178x690x2025mm

 

 The c|flux series can be equipped with an optional auto clean kit either at time of purchase or as an add-on later. The auto clean kit includes a smart sensor that detects a rise in static pressure indicating the filter is getting clogged and automatically activates the cleaning procedure.

Ingenious lift system quickly moves the drum off the floor and seals against the drum lid, avoiding the need for a flex hose. This design allows for much better portability as you are not forcing 4 wheels into the floor while pushing the unit.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$1,599.00

Full Item Details
Laguna Tools | C|Flux: 1 Cyclone Dust Collector
MDCCF15110
-
$1,199.00
X
MDCCF15110

Laguna Tools | C|Flux: 1 Cyclone Dust Collector

Laguna Tools | C|Flux: 1 Cyclone Dust Collector

The c|flux series sets a new standard for cyclones. The horizontal chute is designed to maximize airflow while improving CFM. All shapes and dimensions has been reevaluated to optimize performance.

The c|flux:1 comes standard with a 1 micron canister providing filtration of 99.97% of particles between the sizes of 0.2 to 2 micron & features 48 sq/ft. of polyester spun bond pleated filter to ensure maximum airflow. 270° manual clean comes standard.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

SPECS:

*Motor HP: 1.5 HP
*Phase: 1
*Voltage: 110v
*220v Option available – sold separately
*Full Load Amperage Draw [FLA]: 18.8(110V) / 9.4(220V)
*Hertz: 60
*Plug: No
*RPM: 3450
*Switch type: Radio Frequency Remote switch – Black Box
*Hand held remote control: HF
*Shop Setting CFM*: 900
*Inlet CFM: 1314
*Max Static Pressure (inches of water): 10.1″
*Impeller/Fan Size: 13.5″
*Impeller Material: Steel
*Impeller type: Radial Fin
*Balanced To:: ISO 1940
*Inlet Diameters: 6″ by 4″ x 2 ports
*Drum Capacity: 32 Gal.
*Octagon drum: Metal drum insert
*Drum collection bag (Dia. x L): Plastic bag (Ø610 x 950mmL)
*Canister Filter type: 1 Micron
*Filtration efficiency: 0.2-2micron @ 99.97%
*MERV rating: 12
*Canister diameter: Ø400mm (15.75″)
*Cansiter length: 500mm (19.69″)
*Filter Surface Area: 4.5m²/48ft²
*Canister cleaning: Manual Handle crank. 270 degrees/*Optional Auto cleaning kit available
*Canister filter lower dust collection: Plastic bag (Ø400 x 600mmL)
*Base with perforated sheet across canister floor: N/A
*Wheels: 4″ Flat Caster
*US/CSA Approved: Yes
*Decibel Reading: 82 d B(A) (@9.8ft)
*Machine weight: 105kgs/232Lbs
*Shipping weight: 130kgs/287Lbs
*Assembled Dimensions (L x W x H): 42.5″ x 24″ x 68.5″ | 1078x614x1740mm

 

 The c|flux series can be equipped with an optional auto clean kit either at time of purchase or as an add-on later. The auto clean kit includes a smart sensor that detects a rise in static pressure indicating the filter is getting clogged and automatically activates the cleaning procedure.

Ingenious lift system quickly moves the drum off the floor and seals against the drum lid, avoiding the need for a flex hose. This design allows for much better portability as you are not forcing 4 wheels into the floor while pushing the unit.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$1,199.00

Full Item Details
Laguna Tools | Italian LT37 Bandsaw
MBAND375200
-
$11,999.00
X
MBAND375200

Laguna Tools | Italian LT37 Bandsaw

Laguna Tools | Italian LT37 Bandsaw

Torben Helshoj is 5’ 8 inches on a good day, so you should be able to get the perspective of pure mass the LT37 bandsaw provides. While this industrial bandsaw is huge, great attention has been given to the fine points that make it easy to use and performance perfection. The tilt mechanism is manufactured from two pieces of solid cast iron that slide within each other in a dovetail system. There is an ergonomically designed foot brake that shuts the motor off automatically, and easy blade change make operating this bandsaw a joy.

*$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

SPECS:

*Motor: 15 hp Baldor
*Resaw: 24 “
*Volts: 220 3ph
*Amp Breaker: 50 / 3
*Min. Blade: 1/4″
*Max. Blade: 2 “
*Throat: 36″
*Table Size: 31″ x 50 “
*Blade Length: 261 “
*Table Height: 42 “
*Rack/Pinion: yes
*Foot Brake: yes
*Guides: Laguna Guides
*Base Size: 23″ x 54 “
*Height: 113″
*Weight: 1,610 lbs

 

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$11,999.00

Full Item Details
Laguna Tools | Italian LT18 Bandsaw
MBAND185400
-
$3,999.00
X
MBAND185400

Laguna Tools | Italian LT18 Bandsaw

Laguna Tools | Italian LT18 Bandsaw

The Laguna Tools LT 18 bandsaw is the perfect step-up from the legendary LT16 HD. The larger table and increased resaw height and throat capacity open additional opportunities to show off your woodworking skills. This European saw features a 5 HP Leeson motor to provide plenty of power to match the 18″ resaw height. The standard high/low resaw fence, geared trunions and EZ tension indicator make operation a breeze. Our award winning Laguna Guide system features thumb screws for quick adjustment and precision control.

*$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

SPECS:

*Motor: 5HP 220V 1 phase US Leeson continuous duty motor (Weight: 84 lbs.)
*Volt:1 phase, 220 volt
*Min-Max blade width: 1/8”-1 ¼”
*Resaw Capacity: 18-3/8″
*Throat: 16-1/2″
*Blade Length: 158”
*Foot-brake w/ Micro Switch
*Doors: Safety Micro Switch
*Rack & Pinion Upper Guide
*Rack & Pinion Table Tilt
*Laguna Guides
*Table Size: 19″ x 25 “
*Table Height: 33-1/2″
*Dust Port: 4”
*Overall Height: 77 1/2”
*Dimensions:15″-3/4 x 28-1/2″
*Weight (Net/Ship): 510/575 Lbs
*Optional cool blocks required for blades less than 1/4″

 

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$3,999.00

Full Item Details
Laguna Tools | 8" Parallelogram Jointer ShearTec II
X
MJOIN8020

Laguna Tools | 8" Parallelogram Jointer ShearTec II

Laguna Tools | 8" Parallelogram Jointer ShearTec II

Unique parallelogram support system allows the table to move in the same arc as the cutterhead when raised or lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip breaker.Cabinet stand completely encases motor and pulleys to protect from dust and shavings.The specially-designed cast-iron fence is extra long for continued support throughout the cut.Modular cutterhead provides a consistently clean cut.Jack-screw arrangement allows easy replacement and adjustment of individual knives.In the event the entire cutterhead has to be removed, a new module can be fitted in place without production down-time. The extra-long table provides a full 83” of work support.The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing.Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

THE UNEXPECTED:

*Motor: 3 HP, 220 Volt, 1 Phase, TEFC
*Motor Amperage Rating: 13A
*Cutter-Head RPM: 5000RPM
*Adjustment: Parallelogram w. Crank
*Max. Width: 8”
*Max. Depth: ½”
*Rabbeting Capacity: ½”
*Knife System: Shear-TecII
*4 Sided Carbide 6 Row X 9 = 54
*Cutter-Head Diameter: 3”
*Table Dimensions: 8” X 83”
*Fence Dimensions: 4 ¾” X 40”
*Fence Tilt: 90° & 45° with Positive Stop
*Table Height: 33”
*Dust Port: 4”
*Wheel System: Built-In
*Weight (Net/Ship): 648/750 Lbs.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$2,999.00

Full Item Details
Laguna Tools | 8" Wedgebed Jointer ShearTec II
MJOIN8012
-
$1,999.00
X
MJOIN8012

Laguna Tools | 8" Wedgebed Jointer ShearTec II

Laguna Tools | 8" Wedgebed Jointer ShearTec II

The Laguna 8” Wedgebed Jointer ShearTec II Cutterhead is the perfect “step-up” jointer with increased capacity for serious woodworking.The oversized tables provide plenty of support to easily flatten long, wide boards while the large center mounted cast-iron fence allows for maximum stock support when edge jointing.The cast-iron in-feed and out-feed tables feature independent adjustment on dovetail ways.The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing.Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

THE UNEXPECTED:

*Motor: 2HP, 220 Volt, 1 phase,TEFC
*Cutter-Head RPM:5600
*Motor Amperage Rating: 8A
*Adjustment: Wedge-Bed w. Crank
*Max. Width: 8”
*Max. Depth: ½”
*Rabbeting Capacity: ½”
*Knife System: Shear-TecII
*4 Sided Carbide 6 Row X 9 = 54
*Cutter-Head Diameter: 3”
*Table Dimensions: 8” X 75”
*Fence Dimensions: 4-5/8” X 38”
*Fence Tilt: 45 Degree. 90 & 45 Positive Stop
*Table Height:32”
*Dust Port: 4”
*Wheel System: Built-In
*Weight (Net/Ship) 510/600 Lbs.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$1,999.00

Full Item Details
Laguna Tools | 20" Pro Planer ShearTec II (10HP)
MPLAN2013-0130
-
$6,499.00
X
MPLAN2013-0130

Laguna Tools | 20" Pro Planer ShearTec II (10HP)

Laguna Tools | 20" Pro Planer ShearTec II

The new 20” planer fills the gap between the popular 4 post 16” and 20” planers and the really heavy duty planers. The advantage to this planer over the 4 post planers is the way the bed is secured to the frame with a Gib System. With 5-1/2” of cast Gib travels on the outer machine frame giving the bed more stability than a traditional 4 post machine. It allows the bed to become one with the frame when in its locked position, rather than just relying on the 4 post to keep the bed steady during operation.Features on the Pro Planer include: Bed Rollers with micro adjustment to lower friction when planing woods with high moisture content or resin woods, 2 Feed Speeds, Digital Readout with a tape as backup and a ShearTec II Cutterhead.The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing.Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

THE UNEXPECTED:

*Motor: 10 HP 3 phase 220 volt TEFC
*Readout: Digital with Tape Backup
*Table: 56” D X 20” W Incl. 2 X Cast Iron Extensions
*ShearTecII 4-sided German Solid Carbide Cutterhead
*Inserts: 6 Rows X 23 Knives = 138
*2 Feed Speeds: 16 + 20 Ft/Min
*Mechanical Adjustment of Bed
*Mechanical Adjustment of Bed Rollers
*2 Polished Steel Rollers for Material Return
*5” Dust-Hood
*In/Out-Feed Cast Extensions Included
*Capacity Min-Max: 3/16” – 8”
*Max Removal: 1/8”, 3mm
*Weight: (Net/Ship) 880/990 Lbs.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$6,499.00

Full Item Details
Laguna Tools | Italian LT24 x 17 HD Bandsaw
MBAND245200
-
$4,999.00
X
MBAND245200

Laguna Tools | Italian LT24 x 17 HD Bandsaw

Laguna Tools | Italian LT24 x 17 HD Bandsaw

If you are working on jobs that require a large table and extra throat capacity, then this is the machine for you. Boasting a 17-5/8 inch resaw capacity that is driven by an American made Leeson 5 HP, single phase motor and all the trappings known in the Laguna Tools line of bandsaws. The LT24 x 17 has the "Laguna Collection" of features that include geared trunions, EZ Tension indicator, foot brake, high/low fence system and our award winning Laguna Guide System with Space Age technology. Expect our renowned Laguna quality and built Laguna Tough with all the innovations!

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

THE UNEXPECTED:

*Motor: 6 hp Baldor
*Resaw: 17-5/8″
*Volts: 220
*Amp Breaker: 40 / 1 – 40 / 3
*Min. Blade: 1/8″
*Max. Blade: 1-1/2″
*Throat: 23 1/4″
*Table Size: 24″ x 34-1/2″
*Blade Length: 183″
*Table Height: 35-1/2″
*Total Height: 83″
*Blade Length: 183″
*Rack/Pinion: yes
*Foot Brake: yes
*Guides: Laguna Guides
*Weight: 725 lbs.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

View Full Description

$4,999.00

Full Item Details
Sanding Belt 6" x 108" 80 Grit
SNDBL80
-
$35.00
X
SNDBL80

Sanding Belt 6" x 108" 80 Grit

PROMO: BUY 2 get one FREE! 

*Free Shipping does not apply to this item

SHIPPING/BILLING:
Your order will ship directly from the manufacturer in approximately 5-7 business days.
Express or overnight shipping is not available for this product.
Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries)
Please Contact Cook Woods directly after purchase to discuss shipping arrangements!

WARRANTY/RETURNS:
Laguna handles all warranty/return issues directly.
Click for Warranty Information
Click for Return Information

 

View Full Description

$35.00

Full Item Details
Sanding Belt 6" x 108" 150 Grit
SNDBL150
-
$39.00
X
SNDBL150

Sanding Belt 6" x 108" 150 Grit

PROMO: BUY 2 get one FREE! 

*Free Shipping does not apply to this item

SHIPPING/BILLING:
Your order will ship directly from the manufacturer in approximately 5-7 business days.
Express or overnight shipping is not available for this product.
Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries)
Please Contact Cook Woods directly after purchase to discuss shipping arrangements!

WARRANTY/RETURNS:
Laguna handles all warranty/return issues directly.
Click for Warranty Information
Click for Return Information

 

View Full Description

$39.00

Full Item Details