This beautiful Hawaiian Koa has warm, rich colors with unrivaled iridescence and curl. An occasional bug hole or check might be present. Sapwood will have some pin holes. Some pieces might have a bow that lays flat with minimal pressure. Lumber is kiln dried and ready to use. Beautiful curly figure will vary from piece to piece. Get your piece of this richly colored Koa and spruce up your next woodworking project! This piece has a planar skip, a couple of bark incursions, and would be amaxing for pens, knives, and other high end articles.

This beautiful Hawaiian Koa has warm, rich colors with unrivaled iridescence and curl. An occasional bug hole or check might be present. Sapwood will have some pin holes. Some pieces might have a bow that lays flat with minimal pressure. Lumber is kiln dried and ready to use. Beautiful curly figure will vary from piece to piece. Get your piece of this richly colored Koa and spruce up your next woodworking project! This piece has a small live edge with bug holes, and the heartwood has some curly grain.

This beautiful Hawaiian Koa has warm, rich colors with unrivaled iridescence and curl. An occasional bug hole or check might be present. Sapwood will have some pin holes. Some pieces might have a bow that lays flat with minimal pressure. Lumber is kiln dried and ready to use. Beautiful curly figure will vary from piece to piece. Get your piece of this richly colored Koa and spruce up your next woodworking project! This piece has some splits that are 6-8 inches long and has some bug holes. It would be a good artistic piece, or can cut to use for smaller articles.

This beautiful Hawaiian Koa has warm, rich colors with unrivaled iridescence and curl. An occasional bug hole or check might be present. Sapwood will have some pin holes. Some pieces might have a bow that lays flat with minimal pressure. Lumber is kiln dried and ready to use. Beautiful curly figure will vary from piece to piece. Get your piece of this richly colored Koa and spruce up your next woodworking project! This piece is quartersawn, and around 70% of it is usable for knives or pens. 30% of it has incursions and voids about 1 inch deep in the spalted area on the lower left of the back face.