Laguna Tools | P|Flux: 2 Cyclone Dust Collector

Peerless performance. Sporting standard black HEPA filtration the P|Flux series is filled with innovative details such as:
• LED shows when drum is full
• LED shows when filter needs cleaning
• Swing-away doors sports acoustic foam on the inside to lower noise level.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

SPECS:

Motor HP: 2 HP
Phase: 1
Voltage: 220V
Amps: 14 Amps
Hertz: 60
Plug: No
RPM: 3450
Control Panel: Embedded Anodized Aluminum w. Magnetic On/Off
LED Drum: : Probe activates LED when drum is full
LED Canister:: Sensor detects rise in static pressure inside HEPA Filter & activates LED
Hand Held Remote Control: High Frequency
Shop Setting CFM*: 1166
Inlet CFM: 1740
Max Static Pressure (inches of water): 9.3″
Impeller/Fan Size: 14.5″
Impeller Material: Steel
Impeller Type: Radial Fin
Balanced: ISO 1940
Inlet Diameters: 8″ main to  4″ x 2 ports
Drum Capacity: 46 Gal.
Octagon Drum: Low Pressure Suction
Drum Collection Bag (Dia. x L): Plastic Bag (Ø610 x 950mmL)
Canister Filter Type: HEPA
Filtration Efficiency: 0.4micron @ 99.2%
MERV Rating: 16+/Refer to tab 4
Canister Diameter: Ø400mm (15.75″)
Canister Length: 900mm (35.43″)
Filter Surface Area: 9.5m²/109ft²
Canister Cleaning: Clean using external air compressor (not incl)
Canister Flter Lower Dust Collection: Metal end cap with 4″ hookup
Wheels: (4x) 4″ PU Caster
US/CSA Approved: Yes
Decibel Reading: 76 d B(A) (@9.8ft)
Machine Weight: 154kgs/340Lbs
Shipping Weight: 185kgs/408Lbs
Assembled Dimensions: (L x W x H)1178 x 690 x 2025 mm

When lifting the drum into position a connector on the back of drum automatically hooks up to a pipe in cyclone this way creating a low pressure in bottom of the drum, this is designed to hold down plastic bag to avoid it being sucked up into the cone during use, no other cyclone or dust system has such a smart system, it is a vast improvement over last generation.

If you chose to use the p|flux without a bag you can simple shut off the system using a valve offering you speed and flexibility.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

Peerless performance. Sporting standard black HEPA filtration the P|Flux series is filled with innovative details such as:

• LED shows when drum is full
• LED shows when filter needs cleaning
• Swing-away doors sports acoustic foam on the inside to lower noise level.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

 SPECS:

Motor HP: 1.5 HP
Phase: 1
Voltage: 110v
220v Option available – sold separately
Amps: 18.8 Amps
Hertz: 60
Plug: No
RPM: 3450
Control Panel: Embedded Anodized Aluminum w. Magnetic On/Off
Hand held remote control: High Frequency
Shop Setting CFM*: 900
Inlet CFM: 1314
Max Static Pressure (inches of water): 10.1″
Impeller/Fan Size: 13.5″
Impeller Material: Steel
Impeller Type: Radial Fin
Balanced To:: ISO 1940
Inlet Diameters: 6” manifold 4” x 2
Drum Capacity: 32 Gal.
Octagon Drum: Low Pressure Suction
Drum Collection Bag (Dia. x L): Plastic bag (24” x 37 3/8”)
Canister Filter Type: HEPA
Filtration Efficiency: 0.4micron @ 99.2%
MERV Rating: 16+/Refer to tab 4
Canister Diameter: Ø400mm (15.75″)
Canister Length: 500mm (19.69″)
Filter Surface Area: 4.5m²/48ft²
Canister Cleaning: Clean using external air compressor (not incl)
Canister Filter Lower Dust Collection: Metal end cap with 4″ hookup window & quick release
Frame Wheels: (4x) 4″ PU Caster
Drum Wheels: (4x) 4″ PU Caster
US/CSA Approved: Yes
Decibel Reading: 70 d B(A) (@9.8ft)
Machine weight: 122kgs/269Lbs
Shipping weight: 150kgs/331Lbs
Assembled Dimensions (L x W x H): 45 1/2″ x 24 1/4 x 68 1/2″ : 1078x614x1722mm

When lifting the drum into position a connector on the back of drum automatically hooks up to a pipe in cyclone this way creating a low pressure in bottom of the drum, this is designed to hold down plastic bag to avoid it being sucked up into the cone during use, no other cyclone or dust system has such a smart system, it is a vast improvement over last generation.

If you chose to use the p|flux without a bag you can simple shut off the system using a valve offering you speed and flexibility.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

Laguna Tools | Revo 18|36 Lathe 1.5HP (110V)

The 18|36 Lathe features a brand new design & details that will excite any serious bowl turner! The First feature that will catch your attention is undoubtedly the ergonomic angled control panel made from anodized aluminum. The blue hue of the DRO along with the beautiful knurled control knob fitted with a rubber grip signals this is no ordinary lathe.The bed is made from steel which allows the cast iron headstock to travel incredibly smoothly. Steel is the preferred material due to its well known longevity & strength.Electronic variable speed is obtained via a VFD that converts 1 phase input to 3 phase output, so even at low settings you will get an incredible amount of torque. The DRO gives you an accurate RPM readout at all times any fine adjustments are made electronically. Changing from high to low settings is made easy by using the quick release handle.The headstock & tailstock lock handles are situated on the back to eliminate any interruptions to your work flow. Ergonomically designed handles use a cam lock resulting in a firm feel with no deflection.

Click here to watch the "revolution" in action!

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

THE REVOLUTION IS HERE:

*Electrical: 1.5HP, 110 Volt, 60 hz
*Motor: Induction, 1725 RPM, TEFC
*VFD: Delta S1 Variable Frequency Drive
*Phase: 1 Phase input, 3 Phase output
*Poly-Groove Drive Belt w EZ Access
*Recommended Breaker: 20 Amp
*Spring Loaded Spindle Lock
*Max. Outboard Swing: 32”
*Swing over Banjo: 13 ½”
*Steel Bed: ASTM A36
*Spindle Taper: MT#2
*Swing over Bed: 18”
*RPM High:135-3500
*RPM Low: 50-1300
*Tailstock Quill: 4 ½”, Engraved, Self-Ejecting
*Floor to Spindle Center: 41 ½” w Pads
*Front Bearing: TPI Taiwan 6207LLU
*Rear Bearing: TPI Taiwan 6205LLU
*Spindle Index #: 14/36/48 w Lock
*Distance between Centers: 36”
*Headstock Through-Bore: 3/8”
*Headstock Travel: Full Length
*Tailstock Through-Bore: 3/8”
*Tailstock Storage of centers
*Spindle Size: 1 ¼” X8 TPI RH
*Floor to Bed: 32 ½” w Pads
*Floor Space: W 60” D 26” H 47”
*Weight (Net/Ship): 427/480 Lbs.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information

Laguna Tools | 20" Pro Planer ShearTec II

The new 20” planer fills the gap between the popular 4 post 16” and 20” planers and the really heavy duty planers. The advantage to this planer over the 4 post planers is the way the bed is secured to the frame with a Gib System. With 5-1/2” of cast Gib travels on the outer machine frame giving the bed more stability than a traditional 4 post machine. It allows the bed to become one with the frame when in its locked position, rather than just relying on the 4 post to keep the bed steady during operation.Features on the Pro Planer include: Bed Rollers with micro adjustment to lower friction when planing woods with high moisture content or resin woods, 2 Feed Speeds, Digital Readout with a tape as backup and a ShearTec II Cutterhead.The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing. Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.

**$75.00 Drop Ship Fee from the manufacturer (does not qualify for free shipping).
*Website discounts/coupons/codes do not apply to this item.

THE UNEXPECTED:

*Motor: 7.5 HP 1 phase 220 volt TEFC
*Readout: Digital with Tape Backup
*Table: 56” D X 20” W Incl. 2 X Cast Iron Extensions
*ShearTecII 4-sided German Solid Carbide Cutterhead
*Inserts: 6 Rows X 23 Knives = 138
*2 Feed Speeds: 16 + 20 Ft/Min
*Mechanical Adjustment of Bed
*Mechanical Adjustment of Bed Rollers
*2 Polished Steel Rollers for Material Return
*5” Dust-Hood
*In/Out-Feed Cast Extensions Included
*Capacity Min-Max: 3/16” – 8”
*Max Removal: 1/8”, 3mm
*Weight: (Net/Ship) 880/990 Lbs.

SHIPPING/BILLING:

Your order will ship directly from the manufacturer in approximately 5-7 business days. Express or overnight shipping is not available for this product. Ships by Ground or Freight to the 48 contiguous states (cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries). Please contact Cook Woods at (877) 672-5275 or 4info@cookwoods.com directly after purchasing to discuss shipping arrangements!

WARRANTY/RETURNS:

Laguna Tools handles all warranty/return issues directly.

*Warranty Information
*Return Information